Life Fitness G5 Instrukcja Użytkownika

G5 CABLE MOTION™GYM SYSTEM ASSEMBLY INSTRUCTIONSG5-001 / CLASS H / 04/07/10 / 8289201 REV. C

10STEP 1: Slide the RIGHT BASE (6) over the MOUNTING TUBE (A) of the RIGHT UPRIGHT (4). Loosely secure the RIGHTBASE (6) and RIGHT UPRIGHT (4) to the

1174139394165STEP 2: LOOSELY attach the FOOTPLATE (7) to the RIGHT BASE (6) and LEFT BASE (5) using four M10 x 70mmSCREWS (41) and four FLAT 3/8” WAS

12STEP 3: Position two WEIGHT STACK CUSHIONS (13) and GUIDE RODS (8) at the GUIDE ROD BRACKET (B) on the bot-tom of the FRONT UPRIGHT (1).NOTE: MAKE

22101429C13STEP 4: Remove one QUICK CONNECT from the end of one UPPER (SHORT) CABLE (29). Insert the end (where the QUICK CONNECT was removed) of th

14STEP 5: Dissemble the QUICK CONNECT (32) by removing the two M5 HEX SCREWS (H) from the QUICK CONNECTCOUPLER (D). Carefully remove the COMPRESSION

15STEP 6: Mount the RIGHT BOTTOM PLATE (16) and the LEFT BOTTOM PLATE (17) to the FRONT UPRIGHT (1) using two10-32 x 3/4” PHILLIPS PAN HEAD SCREWS (5

16STEP 7:  Remove one QUICK CONNECT from the end of one LOWER (LONG) CABLE (30). Insert the end (where the QUICK CONNECT was removed) of the the LOW

17STEP 8: Attach the BACK THIGH HOLD CLAMP (18) to the the FRONT UPRIGHT (1) by using two M6 x 60mm SCREWS(51) and two 1/4” WASHERS (52) from the bac

1854202154STEP 9: Attach the TOP FRONT COVER (21) to the TOP BACK COVER (20) using eight M4 ZINC PHILLIPS PAN HEADSCREWS (54). DO NOT OVERTIGHTEN SCR

19STEP 10: Insert the ball end of one GUIDE CABLE (31) through the eye hook on one FLOATING PULLEYS (14). Insert andhook the ball end of the cable in

2TABLE OF CONTENTSSafety Statement . . . . . . . . . . . . . . . .2 Hardware . . . . . . . . . . . . . . . . . . . . . . .8G5 Warning Labels . . .

20STEP 11: Assemble the MOUNTING SHEET (22) to the top of the FRONT UPRIGHT (1) using two M10 x 20mm SCREWS(48) and two 3/8” WASHERS (39). Tighten sc

2728F26F236373534333821STEP 12: Referencing step 5, at the UPPER SWIVEL PULLEYS (2) push back on the QUICK CONNECT SLEEVE (F) at theend of each cable

22MAINTENANCEPlease note:* We recommend cleaning your product (pads and frame) on a regular basis, usingwarm soapy water. Touch-up paint can be purcha

23LIMITED WARRANTYLife Fitness® G5 Cable Motion™ Gym SystemLife Fitness extends the following LIMITED WARRANTY to the original owner (proof of purchas

CORPORATE HEADQUARTERS5100 North River RoadSchiller Park, Illinois 60176 • U.S.A.847.288.3300 • FAX: 847.288.3703800.735.3867 (Toll-free within U.S.A.

3INSPECTION1. DO NOT use or permit use of any equipment that is damaged and or has worn or broken parts. For all LIFE FITNESS equipment use only repla

4NOTE: Lock the weight stack when not using the gym. Make sure all the weight plates are rest-ing on the plate below with no gap in between. Insert th

5GYM DIMENSIONS Resistance Ratio: 1:2Machine Weight: 500 poundsWeight Stack: 160 pounds

612”12”11’-3”13’-4”NOTE: The live area shows the extent of the G5 gym. It does not include the user.G5 LIVE AREA

7COMPONENTS LISTNOTE: This component list is for ASSEMBLY ONLY. For ordering serviceable parts, please go to:http://us.home.lifefitness.com/content.cf

8COMPONENTS LISTHARDWARE ITEM NO. QTY. DESCRIPTION39 14 3/8” WASHER40 4 M10 X 30MM SCREW41 8 M10 X 70MM SCREW42 4 M12 X 80MM SCREW43 8 1/2” WASHER44 4

9HARDWARE:M10 X 50MM HEX TENSION SCREW (#45)M10 HEXNYLOCK NUT (#53)3/8” WASHER (#39)1/2” WASHER (#43)M10 X 30MM SCREW (#40)M6 X 60MM SCREW (#51)1/4” W