Life Fitness OHDHR Instrukcja Użytkownika

OLYMPIC HEAVY DUTY HALF RACK(OHDHR)Part # 7671201Rev. ARevision:12/12/031ASSEMBLY INSTRUCTIONS

10STEP 7:FIGURE 7• LOOSELY assemble one RIGHT & one LEFT ADJUSTMENT RACK (9 & 10) to the REAR UPRIGHTS (4) as shown, using eight3/8 X 3-3/4

11STEP 8:FIGURE 8• SECURELY assemble the ten WEIGHT HORNS (11) to the WEIGHT HORN UPRIGHTS (6) using twenty 1/2 X 4-1/4” BOLTS (25),twenty 1/2” INT

12STEP 9:FIGURE 9• Assemble two SWIVEL SPOTTERS (24) to the BOTTOM UPRIGHT SUPPORT (15) as shown using four 1/2 X 1-1/2” BOLTS (16), four1/2” INT

13STEP 10:FIGURE 10• Insert the LEFT BAR SUPPORT (12) into the desired slots of the LEFT ADJUSTMENT RACK (10), and allow it to drop down to lock inpl

14STEP 11:FIGURE 11 7 91014Thank you for purchasing the OLYMPIC HEAVY DUTY HALF RACK. If unsure of proper use ofequipment, call your local Hammer Stre

Clean:• Upholstery with mild soap and water.• Guide rods with a cotton cloth.• Hand grips with mild soap and water.• Frame damage can be repaired with

PARTS LISTPART #LEA7664801LEA7665001LEA7665101LEA7584901LEA7665501LEA7586601LEA7622401LEA7663901LEA7584401LEA7584501LEA7587501LEA7587901LEA7587801LEA7

316 1/2 X 1-1/2” BOLT203/8” INT TOOTHLOCK WASHER191/2” INT TOOTHLOCK WASHER25 1/2 X 4-1/4” BOLT17 3/8 X 3-3/4” FLAT HEAD BOLT233/8”LOCK NUT221/2”

STEP 1:FIGURE 14• LOOSELY assemble the REAR UPRIGHT (4) to the LEFT UPRIGHT BASE (1) using two 1/2 X 4-1/4” BOLTS (25), two 1/2” PLASITCDOME WASHERS

5STEP 2:FIGURE 2• LOOSELY assemble the BOTTOM UPRIGHT SUPPORT (15) to the REAR UPRIGHTS (4) using four 1/2 X 4-1/4” BOLTS (25), four1/2” PLASITC DOM

6STEP 3:FIGURE 3• LOOSELY assemble the LEFT UPRIGHT SUPPORT (3) to the LEFT UPRIGHT BASE (1) and REAR UPRIGHT (4) using four 1/2 X4-1/4” BOLTS (25),

7STEP 4:FIGURE 4• LOOSELY assemble the PULL-UP SUPPORT (8) to the REAR UPRIGHTS (4) using four 1/2 X 4-1/4” BOLTS (25), four 1/2” PLASTICDOME WASHE

8STEP 5:FIGURE 5• LOOSELY assemble the WEIGHT HORN UPRIGHTS (6) to the LEFT & RIGHT UPRIGHT BASE (1 & 2) and REAR UPRIGHTS (4)using eight 1/

9STEP 6:FIGURE 6• Securely tighten all loose frame connections made to this point.TIGHTENBOTH SIDES!TIGHTENBOTH SIDES!