Life Fitness SM30 Instrukcja Użytkownika

M051-K50-B140 13 STACK MULTI-JUNGLE (SM30)UNPACKING AND ASSEMBLY INSTRUCTIONS

SM30 Unpacking & Assembly Instructions10Figure 12. Bolt the benches to the frame.

SM30 Unpacking & Assembly Instructions11INSTALLING THE CABLESThe SM30 uses three cables. There are two different types of cable used on the SM30.

SM30 Unpacking & Assembly Instructions12ADJUSTABLE CROSSOVER CABLE ROUTINGOnce you’ve removed the pulleys as described previously, route the cross

SM30 Unpacking & Assembly Instructions13Figure 15. Adjustable crossover cable end detail.Using a 7/8” wrench, tighten the jam nut onto the adjusta

SM30 Unpacking & Assembly Instructions14Bolt the cable to the weight stacks as shown in Figure 17. Thread the 7/8” nut up on the cablebolt as show

SM30 Unpacking & Assembly Instructions15 HARDWARE0123456½½½½½½Hardware Figure 1. Assembly Parts.

SM30 Unpacking & Assembly Instructions16The parts shown in Hardware Figure 1 are used to assemble the SM30. They are:A. 7/16” x 6” hex head bolt

SM30 Unpacking & Assembly Instructions17The part shown in Hardware Figure 3 is the 9/16” cable jam nut that’s used to secure thecables to the weig

SM30 Unpacking & Assembly Instructions18Hardware Figure 5. Top assemblies.S. Teardrop pulleys (bolt on above tricep station and lat pulldown)T. 56

SM30 Unpacking & Assembly Instructions19Hardware Figure 6. Weight stack rubber bumpers.W. Weight stack rubber bumpers (inserted under weight stack

SM30 Unpacking & Assembly Instructions2The SM30 comes partially assembled. Follow the steps below to complete the assembly.WARNING: COMPONENTS OF

SM30 Unpacking & Assembly Instructions20PARTS LISTPart # ID Description QuantityMain componentsCubesLat benchLat topsTricep topTeardrop pulleyAdj.

SM30 Unpacking & Assembly Instructions3 UNPACKINGFollow the steps below when unpacking the components of the SM30.1. Cut off the shipping wrapper

SM30 Unpacking & Assembly Instructions4ASSEMBLYFigure 2 shows an assembled SM30.Figure 2. SM30 main components (seats and cables removed for clari

SM30 Unpacking & Assembly Instructions5Figure 3. Configuration for 2-3/4” and 3” bolts.2. Bolt on the teardrop pulleys above the bench and the tr

SM30 Unpacking & Assembly Instructions63. Mount the tops. Mount the 56” lat top to the cell by inserting two of the large 7/16” by 6”bolts using

SM30 Unpacking & Assembly Instructions74. Install the weight stacks. To do this:A. Using a 9/16” socket and combination wrench, remove the trice

SM30 Unpacking & Assembly Instructions8F. With the top plate on the guide rods, bolt on the top plate to the top of the cells asshown in Figure 8

SM30 Unpacking & Assembly Instructions96. Mount adjustable pulley bracket. When shipped, the adjustable pulley bracket lookslike the one shown in